Available in 54 to 72 tooth count
Please specify the tooth count needed when ordering.
All tooth counts are currently in stock.
These gears are hard coat anodized which is unheard-of in the go kart industry.
All other brands are color anodized which means nothing but color.
Nitro gears are machined....not stamped like most other gears.
Less than half the weight of standard gears.
i.e. 69 tooth gear standard=7.5oz ~ 69 tooth Nitro gear =3.3 oz
The Nitro gear can not be put together backwards due to its notch design.
Most Gears have only a small mark which is nearly unnoticeable in pic.
Both halves are marked with the teeth count on it, not just on one.
Nitro gear is narrower. With the gear being narrower, the chain has a tendency not to ride up on the teeth as bad...creating less wear, allowing for less drag.Teeth are teflon inpregnated with our own special formula. Both the teflon coating and the narrower gear, provide less friciton for less drag...which equals better performance.
It is made out of a better grade of aluminum than about 80% of
the gears out there.
Made to fit all standard six bolt drive hubs.
This gear is currently available for #35 chain; we will be offering in #217
in the future.
This is the first go kart sprocket to be made anything like this...Get the original! Imitators will be trying to follow. This gear is competitively priced to a standard gear.